Details: 

Do you need to lock down and secure your system? You can use the information below if you have answered “yes” to any of these questions or want to ensure you are as prepared as you can going forward. The process of resetting a Blink synchronization module is quite simple.

This process has a few moving parts. This is excellent news because you can get your Sync Module up and running again in no time if it’s not working correctly.

Detailed analysis of the issue at hand is warranted. ..

Many people find that their Blink Sync Module needs reset after discovering that specific cameras are not working as they should or that there is a general slowdown across the board. Many people will attempt to power cycle cameras that don’t behave as they should before doing anything else. But if that fails, it’s time for the Sync Module to be reset. Resetting the Sync module does a soft reboot of the entire Blink system. After the reset is complete, all hardware connected to the Sync Module will experience an increase in performance and smoother operation.

Step-By-Step Guide – Reset the Blink Sync Module

The Sync Module is located in the lower right corner of your screen. ..

To reset your Sync Module, locate the RESET button near the USB port and hold it down with a pen, pencil, or small screwdriver. Once the lights on your Sync Module turn red, grab a pen, pencil, or paperclip to complete the reset. ..

This process can take anywhere from 5-10 seconds to 15-30 seconds. Sometimes it takes longer. Regardless of what happens, it would be best if you kept pressing the button until the light turned green. The module will then go through its internal reset process.

If you have a Blink Sync Module, it will activate when you see a single, bright green light and a flashing blue light. It’s time to delete the Sync Module entirely from your profile using the Blink mobile app. Click and hold the module you wish to delete and select the DELETE option. Wait for the system’s finalization. ..

Install the Sync Module 

The next step is to complete the Blink application and re-open it, looking for the (?) icon. Double-check to confirm that the Synchro Module has been deleted. Click on the (+) icon within the mobile app.You will be asked to add a piece of Blink wireless security equipment to your profile. Enter the serial number of the Sync Module and scan the system. Click on the DISCOVER DEVICE button. After the application detects the Sync Module, click on the JOIN Button.Now click on the DONE button to reconfigure the module with the settings that you used in past.

Conclusion:

Your Blink Sync module seems to be brand-new. Your wireless security system will need to be reset through this module. But at least it’s going back to normal! ..

A1: It is possible to factory reset your Blink Sync module by following these steps:

  1. Open the Blink Sync module’s user manual.
  2. On the left-hand side of the manual, you will find a table that lists all of the module’s features and functions.
  3. In the table’s lower section, you will find a list of specific steps that need to be followed in order to factory reset your Blink Sync module.

A2: To Reset a Blink camera, press the button on its side until the light turns red. This will reset the Blink camera system.

To unregister the Blink module, you must first remove it from your system. To do this, you can use the following command: sudo apt-get remove blink

A2: Delete the Sync Module.

Yes, you can delete your Blink profile and start again. ..

Deleting your account will remove all of your messages and data. ..

After you delete your Blink account, your data cannot be used to create a new account.

A4: Blink modules may flash green when they are receiving a new update. This is normal and should stop after a few minutes. If the flashing continues, please contact customer support. ..

A4: A blinking green light on a Blink camera means that your internet connection is not working properly. If the light flashes, it may be indicating an issue with your internet connection.

A5: There could be a number of reasons why your sync module might not be connecting. Here are some possible causes: -The sync module might not be installed or configured correctly -The network connection between your computer and the sync server might be unstable or unavailable -The files being synced might be in a format that the sync module can’t read ..

If you are unsure if you are using the correct password, please join a new device (laptop or tablet) to your Wi-Fi network. If your device is already connected, you can disconnect and forget the Wi-Fi network before reconnecting with the password.