To get the most out of your white Rodgers thermostat, follow these guidelines:
- Keep your program consistent.
- Make sure you are using the right settings for your climate.
- Check your filters and replace them as needed. ..
Your thermostat needs programming because it is not reading the temperature correctly.
According to the US department of Energy, when you set a White Rodgers thermostat program that perfectly suits your temperature needs, you are saving money on your electricity bill.
To save on your electricity bill, it is important to identify your home or office temperature needs and set your White Rodgers thermostat program to suit those needs. This will help to reduce your electricity consumption month after month, and save you money on your bill. ..
If you have white Rodgers thermostat, be sure to program it to suit your needs.
- You need to know what you want to achieve
- You need to know how to achieve it
When the building is empty or during periods of low activity within the building, ensure that the temperatures of your thermostat are programmed to be cooler.
The morning’s heat is reduced by the cooler air. ..
How to plan your program
The factory programmed temperatures and times are usually shown in the sample schedule, if this program is what suits your needs, press the Run button and the factory programmed temperatures and schedules would start running.
If the factory programming temperatures and schedules do not suit your needs, you can follow this guide to program your White Rodgers thermostat.
🟡 Set Date and Time
- Open the thermostat’s cover and locate the battery.
- On some thermostats, there is a small button on the back of the battery that you can press to set the time and date.
- On other thermostats, you will need to use a Phillips head screwdriver to remove the four screws that hold the cover on and then lift it off.
- There will be a small circuit board with a clock on it located near the battery.
- Use a pencil or pen to write down your current time and date, then replace the clock board and screws.
- Close up the cover and test your new settings by turning on your heat or air conditioning unit. ..
When you press the button for setting time, the time will be set to the current time.
The hours are displayed in a clockwise order.
To set the time again, use the arrows pointing up and down to select minute.
Date: Month: Year:
The “Run Program” button will start the program.
🟡 Enter Program for Heating.
The thermostat has two modes: heating mode and cooling mode. ..
- Open the thermostat.
- Look for the “Heating” button on the front of the thermostat.
- Press and hold the “Heating” button until it turns green.
- Release the “Heating” button and wait a few seconds for the thermostat to adjust to your new temperature. ..
The “Heat” icon on the top of the display will show when the system is in “heat.” This means that it is being programmed.
Press the up and down arrows to set the temperature for the first heating period. Then use the left and right arrow keys to adjust the start time. ..
Fans can choose between “Prog” or “Auto” to control the speed of the music. ..
The “set schedule” button moves you to the next program period for the day.
✅ Make a list of all the things you did during each period. ✅ Compare your list of activities with the ones that are listed in your daily planner. Did you do everything on your list? If not, which activities were left out? Did anything unexpected happen during any of the periods? If so, what was it and how did it impact your day? ..
The button labeled “Run schedule” will run your program.
🟡 Enter Program for Cooling
- Choose the right type of cooling system for your needs.
- Choose the right size of cooling system for your needs.
- Choose the right type of fan for your needs.
Press the button tagged “system” until an icon “cool” appears. ..
✅ To set heating days and heating periods, repeat the following steps:
On the “Heating” tab, click on the “Set Days” button.
Enter the number of days you want your heating to turn on, and then click on the “Set Days” button again.
Enter the number of hours you want your heating to turn on, and then click on the “Set Hours” button again.
Click on the “Save Changes” button at the bottom of the window. ..
Open the thermostat.
Look for the programming code on the back of the thermostat.
Change the code if it is not already set to your desired temperature.
The system is on heat.
To cycle through your programmed periods, press the button labeled “PRGM.”
To cool your computer system, move the switch tagged “SYSTEM” to “COOL.” ..
✅ Follow the instructions in step 2 for the hot programs. ✅ Repeat the instructions in step 2 for the programs with a virus. ✅ Follow the instructions in step 2 for the programs that are not working. ..
The button will run a program that will help you fix your computer.
The scheduled program starts automatically and continues as planned.
Changing an already set program
- Open the program that you want to change.
- Choose the option that you want to change.
- Click on the Change button.
- Enter your new information into the new fields and click on the Change button again.
The switch tagged “SYSTEM” can be changed to the mode you want to change by moving the switch to the desired position.
Press the button tagged “PRGM” and select the program you are changing. ..
Change the temperature and periods, and press the “Run” button to see how your cycle changes. ..
Deactivating an already set program
Closing the program’s window.
Clicking on the “X” in the upper-right corner of the window.
Clicking on “Deactivate.” ..
The camera will start to take pictures automatically.
When the camera is done taking pictures, press the HOLD button again to stop it.
Adjusting the temperature levels is a common task when using a oven. The arrows indicate the different temperature levels that are available.
If you want to resume a previously set program after you have pressed “HOLD”, simply press the button tagged “RUN”. The program will begin to run. ..
To save money on your thermostat, make sure to program it to only use heating or cooling when necessary. ..
